Piling services are undertaken by engineers to ensure that the foundation of the building they are working on is secure, even before they begin building the infrastructure on top.
There are various kinds of pile foundations that can be used for transferring the load from superstructures. They are typically brought in for large structures and in situations where a large structure cannot be sustained due to the type of soil it is on.
As these foundations carry a lot of loads, there are a lot of things that are to be taken into consideration while building these. One of the primary concerns that come into the picture is, the type of Pile foundation that should be implemented in a project. This is where the right expertise is required.
Here are some of the most commonly used kinds of Pile foundations that are to be utilized for each kind.
Types of Piles and Where They Can Be Used
1. End-Bearing Piles
The end-bearing piles are used in scenarios where there is a combination of a weak layer of soil and a strong layer of soil. In the end-bearing pile foundations, the bottom end of the pile settles and rests on a layer of stronger soil or even rock. This pile transfers the load of the building to the strict and strengthened layer.
The key principle is that the bottom end rests on a surface that acts as an intersection of a strong and a weak layer. This load, therefore, bypasses the weaker layer and is then transferred to the stronger one.
2. Friction Piles
Another kind of pile that is used for buildings is a Friction Pile. They work on a little different principle. This is a type of pile that transfers the load of the building to the soil across the full height of the pile, with the help of friction. The entire surface of the soil works towards transferring the force onto the soil.
In this kind of pile, the length of the pile is directly proportional to the amount of load it can support.
3. Driven Piles
Driven piles or displacement piles are other kinds of piles that are used for a building foundation that provides support for structures and then transfers the load directly to the soil or the rock that might have sufficient bearing capacity and suitable characteristics to support it.
They are often used to support buildings, towers, walls, and bridges and are considered to be a cost-effective piling solution.
4. Timber Pile
Timber piles are the oldest method of piling which is still in use to this day. They are installed in the same method as driving piles. They are very economical, and safe and provide an efficient and safe structure for both temporary and permanent structures.
Conclusion: The Right Residential Piling Services
The importance of piling cannot be undermined. They are the support structures that are going to keep a building stable eventually.
Moreover, when piling is so important, there has to be a certain degree of care that needs to be taken at each step. A good piling and drilling firm will be able to ascertain what is the right kind of piling service that needs to be undertaken to ensure a rigid and structurally integral building.
One of the best firms to trust here is Atlas Piling and Drilling Inc. The team at Atlas Piling and Drilling provide drilling and piling services to a wide array of residential, commercial, and industrial clients. Their background in construction repair services has enabled them to bring their expertise to the field of residential piling services.
Get in touch with the team at Atlas Piling and Drilling today.